High Temperature Resistant Pain

 

 

Coating industry generally between 100℃ -800℃, paint in the environment high temperature paint also known as high temperature resistant paint, heat resistant paint, organic silicon and inorganic silicon high temperature paint series, as the name implies: is can withstand high temperature oxidation and other medium corrosion paint can achieve stable physical properties (not fall off, foaming, not cracking, powder, allow slight discoloration).

 

 

Widely used in high temperature furnace, hot air furnace outer wall, chimney, flue, drying channel, exhaust pipe, high temperature heat pipe, heating furnace, heat exchanger and other metal and non-metal surface anticorrosion protection.

Technical Parameter
Resin type / pigment type	Epoxy modified silicone / silver powder, rust pigment
Colour	Aluminum silver
Density	About 1.15 kg/L
Thickness Of Wet Film	75 Microns
Thickness Of Dry Film	40 Microns
Theoretical Coating Rate	14 ㎡ / L, calculated as a 40-micron dry film thickness
Flashing Point	25℃
Drying Time	Table dry for 1 hour, finger touch dry for 4 hours (23℃)
Volume Solid Part	53 ± 1% (theoretical value)
Volatile Organic Compound	430g/L
Job Practice	Brush, roll coating, conventional spraying
Ambient Temperature	Minimum 5℃, avoid coating at relative humidity greater than 85%
The Substrate Temperature	Minimum: 3℃ above
Packing Specifications	20kg / barrel
Lay In	Products must be stored according to state regulations. It should be kept in a cool and well-ventilated place to avoid excessive temperature. The container must be firmly sealed.
Expiration Date	a year

 

Surface treatment: no free of grease, dust, soda and other impurities. In order to ensure the appearance of the paint film, the primer should be smooth and smooth, without dry spray, orange peel and other surface defects.

Construction: pneumatic spraying, brushing or conventional spraying

Safety measures: Warning: irritation to the eyes and skin, steam may cause respiratory allergy in sensitive people. May cause allergic skin reactions. Avoid inhalation of vapor. Do not touch the eyes or skin. Ears, eyes, and skin should have protective equipment. To avoid potential breathing to irritation, a suitable respirator is recommended. Wash your skin thoroughly after use. Clothes should be worn after washing.

First aid: If you accidentally contact your eyes, rinse with water for at least 15 minutes and seek medical advice immediately

Note that this document is not a formal technical document, the information listed is reliable, and each value provided is calculated from the formulation of the product as theoretical data. Because the use conditions are not controlled by the manufacturer, the information here is not guaranteed. The product is only used for professional use... If any questions, please contact the superior sales staff.

 

What paint can withstand 2000 degrees?

Paints that can withstand extremely high temperatures, such as 2000 degrees Fahrenheit (about 1093 degrees Celsius), are typically specialty coatings designed for specific industrial applications, such as coating exhaust systems, engines, or industrial equipment exposed to extreme heat. Regular paints, even high-temperature paints commonly used for grills or stoves, are not suitable for such elevated temperatures.

Some types of high-temperature coatings that can withstand temperatures up to 2000 degrees Fahrenheit include:

Ceramic Coatings:

Ceramic-based coatings are designed to provide excellent heat resistance. These coatings often use ceramic nanoparticles and other high-temperature-resistant additives to create a protective barrier.
High-Temperature Resistant Epoxy Coatings:

Certain epoxy coatings are formulated to withstand extreme temperatures. These coatings often contain special resins and additives that provide heat resistance.
Heat-Resistant Silicone Coatings:

Silicone-based coatings can offer good heat resistance. High-temperature silicone coatings are commonly used in industrial settings for their ability to withstand thermal stress.
Thermal Barrier Coatings:

Thermal barrier coatings are designed to provide protection against high temperatures and thermal cycling. They are used in aerospace, automotive, and industrial applications.
It's important to note that the specific temperature resistance of a coating can vary based on the formulation and the manufacturer. Therefore, when selecting a paint or coating for extremely high-temperature applications, it's crucial to:

Consult the manufacturer's technical data sheets and specifications to ensure that the product is suitable for the intended temperature range.

Follow the manufacturer's application instructions and surface preparation guidelines for optimal performance.

These high-temperature coatings are often applied in industrial or specialized settings where extreme heat is a constant factor. Always use the appropriate protective equipment and adhere to safety guidelines when handling and applying such coatings.

Hot Tags: high temperature resistant pain, China high temperature resistant pain manufacturers, suppliers, factory, Acrylic Polyurethane Finish, Acrylic Ripple Coating, Phosphate Epoxy Primer, Anticorrosive Paint, Water based Paint, Alkyd Paint in The Middle