Product Characteristics
Good adhesion, good rust prevention, can be used with alcohol acid finish paint, good combination force, good durability in general climate conditions.
Recommended Use
Black metal base rust prevention, can also be painted on the alcohol acid primer, increase rust resistance.
| Technical Parameter | |
| Base Material Type / Pigment Type | Pigments such as alkyd resin / biotite iron oxide | 
| Colour | light gray | 
| Density | About 1.6 kg/L | 
| Thickness Of Wet Film | 93 micron | 
| Thickness Of Dry Film | 40 Microns | 
| Theoretical Coating Rate | 11 ㎡ / L, calculated as a dry film thickness of 40 microns | 
| Flashing Point | >40℃ | 
| Drying Time | Table dry for 2 hours (23℃) | 
| Volume Solid Part | 43% (theoretical value) | 
| Job Practice | Brush coating, roll coating, and conventional spraying | 
| Heavy Coating Time | Minimum: 12 hours / 23℃ | 
| Ambient Temperature | Maximum: 40℃, avoid coating at relative humidity greater than 85% | 
| The Substrate Temperature | Lowest: above 4℃ | 
| Packing Specifications | 25kg / barrel | 
| Lay In | Products must be stored according to state regulations. It should be kept in a cool and well-ventilated place to avoid excessive temperature. The container must be firmly sealed. | 
| Expiration Date | a year | 
Construction Guidance
Surface treatment: no free of grease, dust, soda and other impurities. In order to ensure the appearance of the paint film, the primer should be smooth and smooth, without dry spray, orange peel and other surface defects.
Construction: pneumatic spraying, brushing or conventional spraying
Safety measures: Warning: irritation to the eyes and skin, steam may cause respiratory allergy in sensitive people. May cause allergic skin reactions. Avoid inhalation of vapor. Do not touch the eyes or skin. Ears, eyes, and skin should have protective equipment. To avoid potential breathing to irritation, a suitable respirator is recommended. Wash your skin thoroughly after use. Clothes should be worn after washing.
First aid: If you accidentally contact your eyes, rinse with water for at least 15 minutes and seek medical advice immediately
Note that this document is not a formal technical document, the information listed is reliable, and each value provided is calculated from the formulation of the product as theoretical data. Because the use conditions are not controlled by the manufacturer, the information here is not guaranteed. The product is only used for professional use... If any questions, please contact the superior sales staff.
Hot Tags: alkyd paint in the middle, China alkyd paint in the middle manufacturers, suppliers, factory, Silver Paint, Epoxy Primer Paint, Water based Paint, Water Rust Converted To Anti Rust Primer, Acrylic Polyurethane Enamel, Chlorinated Rubber Paint



![[[smallImgAlt]]](/uploads/202338986/alkyd-paint-in-the-middle45a63818-abb1-4988-a544-03f4a22638fa.jpg) 
    
    
     
  








