![[[smallImgAlt]]](/uploads/202338986/chlorinated-rubber-paintdf6c5b3b-8e40-4116-939f-fe87623c3530.jpg)
Product Characteristics
Excellent coating performance, excellent water resistance, corrosion resistance, excellent insulation performance and high flame retardant performance.
Recommended Use
Suitable for storage tank, bridge and other steel structure surface and concrete surface of medium and severe corrosive environment, especially for seaside and other occasions with high salt spray resistance requirements.
|
Technical parameters |
|
|
Resin Type / Pigment Type |
Chlorinated rubber resin / selected antirust pigments |
|
Colour |
Grey, iron red |
|
Density |
1.3kg/L |
|
Thickness Of Wet Film |
83 micron |
|
Thickness Of Dry Film |
40 Microns |
|
Theoretical Coating Rate |
12 ㎡ / L, calculated as a dry film thickness of 40 microns |
|
Flashing Point |
>37℃ |
|
Drying Time |
Table stem 30 minutes |
|
Volume Solid Part |
48 ± 1% (theoretical value) |
|
Job Practice |
Brush brushing, roll coating, shower coating, conventional spraying |
|
Thinner |
Material: LX-15. Cleaning agent: LX-15 |
|
Heavy Coating Time |
Minimum 23℃ 8 hours and maximum 23℃ 3 days |
|
Ambient Temperature |
Maximum 40℃, avoid coating at relative humidity greater than 85%.。 |
|
The Substrate Temperature |
above 4℃ |
|
Packing Specifications |
25kg / barrel |
|
Lay In |
Products must be stored according to state regulations. It should be kept in a cool and well-ventilated place to avoid excessive temperature. The container must be firmly sealed. |
|
Expiration Date |
a year |
Construction Guidance
Surface treatment: no free of grease, dust, soda and other impurities. In order to ensure the appearance of the paint film, the primer should be smooth and smooth, without dry spray, orange peel and other surface defects.
Construction: pneumatic spraying, brushing or conventional spraying
Safety measures: Warning: irritation to the eyes and skin, steam may cause respiratory allergy in sensitive people. May cause allergic skin reactions. Avoid inhalation of vapor. Do not touch the eyes or skin. Ears, eyes, and skin should have protective equipment. To avoid potential breathing to irritation, a suitable respirator is recommended. Wash your skin thoroughly after use. Clothes should be worn after washing.
First aid: If you accidentally contact your eyes, rinse with water for at least 15 minutes and seek medical advice immediately
Note that this document is not a formal technical document, the information listed is reliable, and each value provided is calculated from the formulation of the product as theoretical data. Because the use conditions are not controlled by the manufacturer, the information here is not guaranteed. The product is only used for professional use... If any questions, please contact the superior sales staff.
Hot Tags: chlorinated rubber paint, China chlorinated rubber paint manufacturers, suppliers, factory, Epoxy High Build Primer, Acrylic Polyurethane Finish, Alkyd Paint in The Middle, Water based Paint, Acrylic Ripple Coating, Phosphate Epoxy Primer
