![[[smallImgAlt]]](/uploads/202338986/acrylic-enamelb04f8e98-2c02-4c3b-8167-2a5c30192619.jpg)
Product Features
Quick-Drying
Excellent Corrosion Resistance
Weather Resistance
Chemical Resistance
Recommended Use
Construction works (inner and exterior): concrete surface, steel structure
Industrial (internal and external): steel structure, equipment
|
Technical Parameters |
|
|
Paint material type / pigment type |
Acrylic resin / chemical-resistant pigments |
|
Colour |
Customize according to the user's requirements |
| Surface | half matt gloss |
|
Mixture Ratio |
Not Have |
| Hardener |
Not Have |
|
Density |
1.2kg/L |
|
Volume solid part |
40% (theoretical value) |
|
Flashing Point |
33℃ |
|
Mixed use period |
Not Have |
|
Theoretical coating rate |
10 ㎡ / L (50 μ m dry thickness) |
| Monolayer membrane thickness | Wet film: 100 μ m Dry film: 40 μ m |
|
Job Practice |
No gas spraying, conventional spraying, brush brushing |
| Thinner |
BX-30 |
|
Tool cleaning |
BX-30 |
|
Volatile Organic Compound |
610g/L |
|
Drying Time |
About 0.5 hours (23℃) |
|
Bone Dry |
7 Days, 23℃ |
|
Heavy coating time |
Within 30 to 60 minutes; apply on the intermediate paint or primer, up to 15 days after 3 hours. |
| Recommended primer |
Epoxy series primer |
| Ambient Temperature |
Minimum: -10℃, maximum of 50℃. Avoid coating at a relative humidity above 85%. |
|
The substrate temperature |
Lowest: above 3℃ |
| Packing Specifications | 20kg / barrel |
| Storage and product shelf-life |
Products must be stored according to national regulations, and should be stored in a cool and well-ventilated place to avoid too high temperature. The container must be firmly sealed. |
| Product shelf date |
1 year. |
Construction Guidance
Surface Preparation: YY-310: be free of grease, dust, moisture and other impurities before construction. In order to ensure the appearance of the paint film, the primer should be smooth and smooth, without dry spray, orange peel and other surface defects.
Mix and dilute: YY-310 is a single packaging product. Before use, the paint should be mixed evenly, and then add appropriate diludilution before construction.
Construction: YY-310 may be sprayed, brushed or conventional.
Ventilation: maintaining good ventilation in closed places is very important for the safety of construction personnel and for maintaining the correct performance of the product. The air must be dry because the product cannot be painted when the humidity exceeds 85%.
Safety precautions: Warning: With irritation to the eyes and skin, steam may cause respiratory allergies in sensitive people. May cause allergic skin reactions. Avoid inhalation of vapor. Do not touch the eyes or skin. Ears, eyes, and skin should have protective equipment. To avoid potential respiratory irritation, a suitable respirator is recommended. Wash your skin thoroughly after use. Clothes should be washed and worn. If there is no breathing, breathe mouth to mouth and seek medical attention quickly.
First aid: If you accidentally contact your eyes, rinse with water for at least 15 minutes and seek medical advice immediately.
Attempt attention: This document is not a formal technical document and the information listed is reliable. Each value provided is calculated as theoretical data from the formulation of the product. Since the conditions of use are not controlled by the manufacturer, the information here is not a guarantee. The product is only used for professional use. If you have any questions, please contact the customer service of Dongguan superior Chemical.
Hot Tags: acrylic enamel, China acrylic enamel manufacturers, suppliers, factory, Epoxy Primer Paint, Epoxy Ester Primer, Epoxy High Build Primer, Parking Lot Floor Paint, Phosphate Epoxy Primer, Alkyd Paint in The Middle
