Epoxy thin-coated floor paint consists of epoxy resin, pigment, physical pigment, auxiliary agent and organic solvent as component A, polyamide resin solution as component B; The two components are proportioned according to the specified ratio.
The common base surfaces of epoxy thin coating floor paint mainly include concrete floor, cement mortar screed floor, terrazzo floor, emery wear-resistant ground, epoxy floor, etc. The ground itself has a certain strength and compressive properties to ensure that the epoxy floor paint will not crack because of the fracture of the base; And there is a certain gap in the interior to facilitate the penetration of epoxy floor paint primer and ensure good adhesion.
ISO Quality Management System Certification
Test Report
Construction Reference
First, the base surface
Before painting, the surface should be free of water, impurities, and flat. The impurities present in the painted surface are cleaned with a broom, the oil is cleaned with a specific solvent, and all are washed away with water.
Second. Deployment
The two components of epoxy floor paint are mixed according to the painting requirements, and the amount of paint can not be increased or decreased at will. The specific amount of paint is determined according to the size of the painting part, and then fully stirred.
Third, brushing process
When painting, choose the appropriate way, and to master the painting technology, and pay attention to the selection of tools, clean the tools in advance, avoid the residual paint in the tools, affecting the painting process, and for the unnecessary painting parts, it is recommended to use good shielding measures.
When we go out, we will find that the road surface in many places is paved with epoxy floor paint, which makes the road look both environmentally friendly and beautiful. So, what is the role of epoxy floor paint?
1, Excellent adhesion: epoxy floor paint has many hydroxyl and ether bonds, so it can be adsorbed with the substrate, so the paint film has excellent adhesion to metal, ceramics, glass, concrete, wood and other substrates.
2, Excellent chemical resistance: epoxy floor paint has excellent alkaline resistance and good adhesion, can be used as a large number of anti-corrosion primer, due to the three-dimensional network structure after curing, can be resistant to oil impregnation, can also be used for oil tanks, oil tankers and aircraft overall oil tank lining anti-corrosion.
3, Good toughness: compared with thermosetting phenolic resin paint, epoxy floor paint contains aromatic rings and is hard, has ether bonds, is conducive to the rotation of molecular chains, and has a certain toughness.
4, Good wear resistance: we often see epoxy floor paint used in garages or stadiums. This method will have a lot of tire friction and traffic, but still maintain good condition.
5, Anti-corrosion: floor paint can achieve good anti-corrosion effect, especially in chemical laboratories or workshops. Epoxy floor paint can effectively prevent chemical corrosion of the ground and protect the ground.
6, Easy to clean: clean bright epoxy floor is very convenient. It is easy to clean the epoxy floor surface with ordinary cleaning tools, which greatly improves the efficiency of environmental protection and cleaning.
FAQ
1. What is epoxy floor paint?
Epoxy floor paint is a special coating composed of epoxy resin and curing agent, mainly used for floor protection and decoration. After coating, after a certain time of reaction and curing, it can form a hard, wear-resistant, chemical corrosion resistant, dustproof, easy to clean and other excellent performance of the ground coating.
Because of its excellent performance characteristics, epoxy floor paint is widely used in industrial plants, warehouses, parking lots, hospitals, schools, commercial centers and other places. It can improve the service life of the ground, beautify the environment, reduce maintenance costs, and has a certain anti-slip, dustproof, waterproof and other functions
2. What is the main use of epoxy floor paint
1. Protect the ground: epoxy floor paint can provide a hard and wear-resistant protective layer for the ground, effectively preventing the ground from being damaged by force, wear or chemical erosion.
2. Improve ground durability: The ground coated with epoxy floor paint usually has a longer service life and can withstand more pressure and flow.
3. Beautify the environment: epoxy floor paint can provide a variety of colors and designs according to demand, so that the ground looks more tidy and beautiful.
4. Dust and easy to clean: epoxy floor paint can reduce the dust generation on the ground, and the surface is smooth, convenient for daily cleaning and maintenance.
5. Waterproof and impermeable: Some epoxy floor paint products have waterproof and impermeable functions, and are suitable for places that need moisture-proof or water seal.
6. Provide anti-slip function: special epoxy floor paint products can be selected to increase the anti-slip property of the ground and improve safety.
7. Improve brightness: Some epoxy floor paint products can provide high brightness surface, increase lighting effect and visual effect.
8. Chemical corrosion protection: For places that need to resist chemical erosion, such as chemical plants, laboratories, etc., epoxy floor paint can provide effective protection.
3. What are the advantages of epoxy floor paint?
1. Strong wear resistance: After curing, the surface of epoxy floor paint is hard and wear-resistant, which can resist the daily activities of vehicles, machinery and personnel.
2. Chemical corrosion resistance: epoxy floor paint can resist the erosion of a variety of chemical substances, suitable for chemical industry, laboratory and other chemical corrosive environment.
3. Dustproof and easy to clean: The surface of epoxy floor paint is smooth, not easy to accumulate dust, easy to carry out daily cleaning and maintenance.
4. Beautiful: provide a variety of colors and design options, can be customized according to the needs of the place, beautify the environment.
5. Fast curing: The curing time of epoxy floor paint is relatively short, and it can be quickly put into use.
6. High mechanical strength: The ground coated with epoxy floor paint has high mechanical strength and can withstand large loads.
7. Anti-slip performance: epoxy floor paint with anti-slip function can be selected to increase the safety of the ground.
8. Good temperature resistance: It has good temperature resistance and is suitable for high or low temperature environment.
9. Environmental protection: Most of the modern epoxy floor paint products are low VOC or no VOC formulations, which have little impact on the environment and human health.
10. Long service life: Properly constructed and maintained epoxy floor paint can be used for many years without major repairs
4. How long does epoxy floor paint take to cure
The curing time of epoxy floor paint depends on many factors, including the specific formulation of the product, temperature, humidity, coating thickness, etc. In general, the curing time of epoxy floor paint can be divided into the following stages:
1. Touch drying: After coating, epoxy floor paint usually reaches the state of touch drying within a few hours, but it is still not suitable for carrying weight or other work.
2. Hardening: Within 24-48 hours after coating, epoxy floor paint usually hardens and can withstand slight pressure and flow.
3. Full cure: The time for full cure may take 3-7 days or more, depending on the above factors. During this period, the performance of the floor paint will gradually reach the best state.
In the construction environment, in order to ensure the best curing effect and the performance of floor paint, it is often necessary to follow the guidance and recommendations provided by the manufacturer, especially under special temperature or humidity conditions. Curing time is a key factor in ensuring the quality and performance of epoxy floor paint, so these factors should be fully considered before construction.
5. How to maintain epoxy floor paint?
Maintenance of epoxy floor paint can ensure its long service life and good appearance. Here are some suggested maintenance methods:
1. Daily cleaning:
Use a soft brush or mop for gentle cleaning and avoid hard brushes or abrasives.
Use neutral cleaning agents or water for cleaning, avoid acidic or alkaline cleaning agents to prevent corrosion of epoxy floor paint.
2. Avoid collision with sharp objects:
Avoid using sharp or heavy objects to drag directly on the floor to reduce scratches or damage.
3. Check regularly:
Regular inspection of the floor surface, if there is damage, wear or foam, should be repaired or maintained in time.
4. Prevent chemical erosion:
Avoid splashing strong acid, alkali or other chemicals directly on the floor. If there is sputtering, it should be cleaned immediately.
5. Waterproof and moisture-proof:
Treat the desired area with a waterproof sealing material to prevent moisture penetration.
6. Avoid heat:
Avoid storing or operating at high temperatures for a long time, so as not to affect the performance and appearance of the floor.
7. Repainting:
According to the use of the floor, it is regularly painted or renovated to maintain its good appearance and performance.
8. Follow manufacturer recommendations:
Operate according to the maintenance guidelines and recommendations provided by the manufacturer to ensure optimal maintenance of the floor paint.
Maintaining epoxy floor paint not only extends its service life, but also ensures that it provides the best performance and appearance. Therefore, regular maintenance and inspection are very important.
6. What is the difference between epoxy floor paint and ordinary paint
1. Ingredients:
Epoxy floor paint: mainly composed of epoxy resin and curing agent, after chemical reaction can form a hard, wear-resistant coating.
Common coatings: May consist of a variety of resins, solvents, pigments and additives, with different formulations according to different needs and applications.
2. Use:
Epoxy floor paint: mainly used in industrial and commercial ground protection and decoration, with wear resistance, chemical corrosion resistance and other characteristics.
Common paint: suitable for home, building, furniture and other places and objects surface decoration and protection.
3. Performance:
Epoxy floor paint: has excellent wear resistance, chemical corrosion resistance, dust resistance, easy to clean and other characteristics.
Common coatings: Performance varies according to the type and use of coatings, such as some with waterproof, mildew, fire and other characteristics.
4. Construction requirements:
Epoxy floor paint: high construction technical requirements, usually need professional construction team and equipment.
Ordinary coating: The construction is relatively simple, and common tools such as brushes and rollers can be used for painting.
5. Cost:
Epoxy floor paint: Usually the cost is higher, but because of its long-term performance and durability, the overall economic benefit is better.
Common coatings: Costs vary depending on the type and quality of coatings, and some costs are relatively low.
6. Maintenance:
Epoxy floor paint: It usually requires regular professional maintenance and inspection to ensure its long-term performance and appearance.
Common coatings: Maintenance is relatively simple and conventional cleaning methods and tools can be used.
7.Can epoxy floor paint be used in humid environments?
Epoxy floor paint is feasible to use in a certain degree of humid environment, but the following points should be noted:
Choose the right product: When using epoxy floor paint in a humid environment, choose a product specifically designed for use in humid environments. These products usually have better water and moisture resistance.
Pretreatment: Before construction, ensure that the ground is dry, clean and appropriate pretreatment, such as grinding, dust removal, etc., to improve the adhesion of the coating.
Construction conditions: When performing construction in a humid environment, attention should be paid to the ambient temperature and humidity. Try to choose dry, warm weather for construction to ensure the cure and performance of the coating.
Moisture-proof measures: In a particularly humid environment, in addition to the use of epoxy floor paint with good moisture-proof performance, you can also consider moisture-proof treatment, such as the use of moisture-proof primer, moisture-proof course treatment.
Regular inspection and maintenance: Epoxy floor paint used in humid environments should be regularly inspected and maintained to ensure its long-term performance and appearance.
8. How to solve the problem of cracking or foaming of epoxy floor paint?
The cracking or foaming problem of oxygen floor paint may be caused by a variety of reasons, such as improper construction, environmental conditions, material quality and so on. Here are some suggested ways to address these issues:
1. Cause analysis:
First of all, it is necessary to conduct a detailed inspection and analysis of the floor with cracking or bubbling to determine the specific cause of the problem.
2. Construction inspection:
Check whether there are problems such as air trapping, high humidity, uneven coating thickness or improper curing during construction.
Verify that the construction tools and equipment are appropriate, such as rollers, brushes, mixing equipment, etc.
3. Environmental conditions:
If the problem is caused by high ambient humidity or large temperature changes, the construction or repair should be carried out again under appropriate environmental conditions.
4. Material problem:
Check that the epoxy floor paint and curing agent used are suitable to ensure that the ratio and construction are carried out in accordance with the manufacturer's recommendations and guidelines.
If necessary, replace or adjust materials and choose products of reliable quality.
5. Repair method:
For cracked floors, repair methods such as grinding, cleaning and re-painting can be carried out to ensure the quality and appearance of the coating.
For the foaming floor, the cause of the foam should be determined first, such as air trapping, humidity problems, etc., and then the appropriate repair, such as cutting, filling, grinding and re-painting.
6. Professional Consultation:
If the problem is more complex or uncertain how to solve, it is recommended to consult a professional epoxy floor paint supplier or construction team to obtain professional advice and help.
In short, solving the problem of cracking or foaming of epoxy floor paint requires careful analysis of the problem, ensuring that the root cause of the problem is found, and appropriate repair and improvement measures are taken. During repair and maintenance, the manufacturer's recommendations and guidance should be followed to ensure the quality and performance of the floor paint.
Hot Tags: epoxy floor paint, China epoxy floor paint manufacturers, suppliers, factory, red reflective paint for roads, Acrylic Polyurethane Enamel, reflective yellow paint for concrete, Special Heat resistant Sheet Metal Grey for Powder, reflective beads for paint, luminous green paint
