Alkyd enamel is prepared by alkyd resin, pigment, auxiliary agent, solvent, etc. The paint has good luster, full film, bright color, good mechanical strength, good weather resistance and natural drying.
Suitable for indoor and outdoor metal and wood surface protection and decorative coating.
ISO Quality Management System Certification
Physical Parameter
|
State in a container |
There is no hard lump when mixing, and it is in a uniform state |
|
Film appearance |
normal |
|
Dry film thickness |
35-40 microns/channel |
|
Theoretical dosage |
5-6㎡/kg (dry film thickness 35 microns) |
|
Drying time (25±1℃) |
Surface dry ≤3 hours; Work ≤24 hours |
|
Gloss (60°) |
≥60% |
|
fineness |
≤20 microns |
|
Discharge time (ISO6 cup /s) |
≥35 |
|
Bending resistance |
≤3mm |
|
Water resistance (8h) |
No abnormalities |
|
Crusts (48h) |
non-crusting |
Construction Description
1. The surface of the coated material requires oil removal and decontamination. The front paint must be completely dry.
2. The paint must be fully stirred before use, if the viscosity is too thick, can be adjusted to the construction of the diluent. A coating dry film is not easy to be too thick (50+5µm is appropriate), otherwise it will easily lead to poor drying and lead to quality accidents. To obtain a thicker coating can be used in multiple construction.
3. Coating method: roller coating, brush coating, spraying.
4. In order to ensure the quality, please use the matching alkyd paint special thinner
Recoating interval time
One a day, it is recommended to paint 2.
Front matching paint
Alkyd anti-rust iron red primer, alkyd anti-rust red lead primer.
Substrate temperature
3°C above the dew point.
Matters needing attention
Avoid inhaling solvent vapor or spray for a long time, the skin and eyes should not be in contact with this product, in the narrow or air does not flow through the construction, must provide strong ventilation, should wear protective tools.
FAQ
1. What is alkyd enamel?
Alkyd enamel is a kind of magnetic coating, which can form a magnetic surface after coating. Such coatings usually contain organic solvents, magnetic powders, and other additives. The surface coated with alkyd enamel is capable of absorbing magnetic objects, such as magnetic stickers or magnets, thereby creating magnetic functions on this surface, such as magnetic walls or magnetic information boards.
2. Which surfaces are alkyd coatings suitable for?
Alkyd lacquers are generally suitable for a variety of different surfaces, including but not limited to:
1. Wood surface: such as wooden furniture, wooden decoration, etc.
2. Metal surface: such as metal walls, metal furniture, etc.
3. Plastic surface: Some types of plastic may require proper treatment or priming first.
4. Wall: including indoor wall to provide magnetic function.
5. Other non-magnetic surfaces: such as gypsum board, stone, etc., so that it has magnetic properties.
However, before coating, it is important to ensure that the selected surface is clean, dry and smooth, and that the appropriate treatment and primer is applied according to the manufacturer's recommendations for alkyd enamel.
3. How long does alkyd enamel need to dry?
The drying time of alkyd coatings is affected by a variety of factors, including but not limited to the thickness of the coating, ambient temperature, humidity, and ventilation. In general, the surface dry time is 2-4 hours, and the practical time is 24 hours
4. What is the difference between alkyd enamel and other types of magnetic coatings?
Alkyd enamel and other types of magnetic coatings may have some differences in composition, application and performance. Here are some possible differences:
1. Ingredients:Alkyd enamel: Usually contains organic solvents, magnetic powders and other additives.
Other magnetic coatings: Different types of resins, magnetic powders and additives may be used.
2. Magnetic strength:Different types of magnetic coatings may have different magnetic strength and durability.
3. Applicable surface:The applicable surface of alkyd enamel may differ from other magnetic coatings and may require specific primers or pre-treatments.
4. Application Method:In terms of coating, drying and subsequent treatment, different magnetic coatings may have different application requirements and steps.
5. Environmental adaptability:Different magnetic coatings may have different sensitivity and tolerance to environmental factors (such as humidity, temperature, etc.).
6. Cost and Availability:The cost, supply, and availability of alkyd coatings and other magnetic coatings may vary, which may affect selection and application decisions.
In general, the choice of alkyd enamel or other types of magnetic coatings should be considered based on the specific application needs, budget, availability and other factors.
5. What is the maintenance method of alkyd enamel
Alkyd enamel, like other coatings, requires proper maintenance to ensure the durability of its appearance and performance. Here are some recommended maintenance methods:
1. Avoid scratches: Try to avoid using sharp or hard objects to scratch the surface of alkyd enamel.
2. Avoid wetting: Avoid long-term liquid accumulation on the surface of the alkyd enamel, especially acidic or alkaline liquids.
3. Cleaning: Gently wipe the surface with a damp cloth regularly to remove dust and stains. Avoid cleaning agents that contain strong acids or bases.
4. Avoid high temperatures: Avoid exposing the surface of alkyd enamel to extremely high temperatures, as this may affect its performance and appearance.
5. Avoid direct sunlight: Prolonged exposure to sunlight may cause the color to fade or the surface to age.
6. Regular inspection: Check the alkyd enamel surface regularly to find any damaged or worn ar
7. Use appropriate tools: When working or operating on the surface of alkyd enamel, use appropriate tools and materials to avoid damaging the surface.
8. Follow manufacturer's recommendations: Always follow the maintenance and use recommendations provided by the manufacturer of alkyd enamel.
6. What can alkyd enamel be used for?
Alkyd enamel is a versatile coating that can be used to make a variety of items and structures with magnetic functions. Here are some possible applications made with alkyd enamel:
1. Magnetic wall: Paint the wall to create an area where the entire wall can be used to absorb magnetic objects.
2. Information board: Make a writable magnetic information board to facilitate the change and adjustment of information.
3. Teaching tools: Make magnetic whiteboards, magnetic maps or other teaching tools to facilitate teaching and display.
4. Decorations: Make magnetic decorations or decorations, such as magnetic photo walls or artwork.
5. Office supplies: Make magnetic pen holders, folders or other office supplies for easy sorting and storage.
6. Games and toys: Design magnetic game boards, puzzles or other magnetic toys.
7. Experimental tools: Used in laboratories or research sites to make magnetic test benches or tools.
8. Display rack: Make magnetic display rack or display cabinet to facilitate display and adjustment of exhibits.
9. Household items: Design magnetic home decorations, magnetic key holders or other magnetic household items.
10. Commercial and advertising purposes: The production of magnetic advertising boards, promotional materials or exhibition supplies in commercial places.
Alkyd enamel is widely used and can be innovated and designed according to specific needs and creativity. When using alkyd enamel to make items, it is recommended to consider its use environment, functional requirements, and the characteristics and limitations of the paint.
Hot Tags: alkyd enamel, China alkyd enamel manufacturers, suppliers, factory, red reflective paint for metal, Blue Luminous Paint, red reflective paint for roads, Anticorrosive Paint, Acrylic Polyurethane Finish, Acrylic Polyurethane Enamel
