Acrylic Polyurethane Finish

 

 

High gloss, high fixation, excellent chemical resistance, good gloss durability and color durability.

 

 

Suitable for protective finish under extensive atmospheric corrosion environment, to meet the durability and color protection performance of outdoor working equipment such as steel structure, equipment and construction machinery.

Technical Parameter
Resin Type / Pigment Type	Acrylic resin / selected pigments
Colour	According to the Raul color card, paint film color card, Pantone color card color palette, can also be customized according to the user requirements
Density	About 1.2 kg/L
Thickness Of Wet Film	98 Microns
Thickness Of Dry Film	50 Microns
Theoretical Coating Rate	13 ㎡ / L, calculated as a 40-micron dry film thickness
Flashing Point	>33℃
Drying Time	Table dry for about 1 hour and finger for about 4 hours (23℃)
Volume Solid Part	51 ± 1% (theoretical value)
Volatile Organic Compound	440g/L
Job Practice	Brush, roll coating, conventional spraying
Completely Solidified	Minimum: -10℃, maximum: 50℃. Avoid coating at a relative humidity greater than 85%
Ambient Temperature	Minimum: 3℃ above
The Substrate Temperature	Two components: 20kg / barrel
Packing Specifications	Products must be stored according to state regulations. It should be kept in a cool and well-ventilated place to avoid excessive temperature. The container must be firmly sealed.
Expiration Date	a year

 

Surface treatment: no free of grease, dust, soda and other impurities. In order to ensure the appearance of the paint film, the primer should be smooth and smooth, without dry spray, orange peel and other surface defects.

Construction: pneumatic spraying, brushing or conventional spraying

Safety measures: Warning: irritation to the eyes and skin, steam may cause respiratory allergy in sensitive people. May cause allergic skin reactions. Avoid inhalation of vapor. Do not touch the eyes or skin. Ears, eyes, and skin should have protective equipment. To avoid potential breathing to irritation, a suitable respirator is recommended. Wash your skin thoroughly after use. Clothes should be worn after washing.

First aid: If you accidentally contact your eyes, rinse with water for at least 15 minutes and seek medical advice immediately

Note that this document is not a formal technical document, the information listed is reliable, and each value provided is calculated from the formulation of the product as theoretical data. Because the use conditions are not controlled by the manufacturer, the information here is not guaranteed. The product is only used for professional use... If any questions, please contact the superior sales staff.

 

What is the difference between acrylic polyurethane and polyurethane?

Acrylic polyurethane and polyurethane are both types of protective finishes used in various applications, such as wood finishing, automotive coatings, and industrial coatings. While they share the common element of polyurethane, there are differences between them in terms of composition, properties, and applications.

Composition:

Acrylic Polyurethane: This type of finish is a combination of acrylic and polyurethane resins. Acrylic resins contribute to the clarity, hardness, and durability of the finish, while polyurethane resins provide flexibility, adhesion, and chemical resistance.

Polyurethane: In a general sense, polyurethane refers to a finish that contains polyurethane resins. This can include both water-based and oil-based formulations. Polyurethane finishes are known for their toughness, durability, and resistance to abrasion.

Base (Water-based vs. Oil-based):

Acrylic Polyurethane: Typically water-based, which means it has a lower level of volatile organic compounds (VOCs) compared to oil-based finishes. It dries faster and has less odor.

Polyurethane: It can be either water-based or oil-based. Oil-based polyurethane tends to have a stronger odor and a longer drying time compared to water-based polyurethane.

Appearance:

Acrylic Polyurethane: Generally has a clear and non-yellowing appearance. It tends to maintain the natural color of the substrate (e.g., wood) better than some oil-based polyurethanes.

Polyurethane: Oil-based polyurethanes may have an amber or yellowish tint, which can deepen over time. Water-based polyurethanes are usually clearer and have less impact on the natural color of the substrate.

Application:

Acrylic Polyurethane: Often used for interior applications such as furniture, cabinets, and woodwork. It is known for its resistance to chemicals, water, and household chemicals.

Polyurethane: Suitable for both interior and exterior applications. Oil-based polyurethanes are often used for surfaces that require a high level of durability and water resistance, such as floors. Water-based polyurethanes are commonly used for interior woodwork and furniture.

Durability:

Acrylic Polyurethane: Offers good durability and resistance to wear, but it may not be as hard as some oil-based polyurethanes.

Polyurethane: Generally known for its excellent durability, toughness, and resistance to abrasion.

When choosing between acrylic polyurethane and polyurethane, consider factors such as the specific application, desired appearance, environmental considerations, and the level of durability required for the project. Additionally, always follow the manufacturer's guidelines and recommendations for application and maintenance.

Hot Tags: acrylic polyurethane finish, China acrylic polyurethane finish manufacturers, suppliers, factory, Zinc Rich Epoxy Primer, Epoxy Primer Paint, Acrylic Polyurethane Finish, Silver Paint, Iron Oxide Red Alkyd Primer, Phosphate Epoxy Primer