Translucent yellow-green liquid; The daytime appearance is a yellowish liquid, which emits a yellow-green light after storage.
1. Composition: The paint is mainly dispersed by synthetic resin or emulsion, energy storage luminescent materials and other substances.
2. Characteristics: The paint emits a certain amount of light by its own energy storage substance, which absorbs light energy under the irradiation of sunlight, light and visible light, and under dark conditions, the absorbed energy is emitted out at low frequency visible light, and the luminescence phenomenon caused by visible light excitation.
3. Uses: The paint is mainly used for construction, decoration, advertising, traffic road signs, artificial landscapes, can also be used as luminous signs in hotels, shopping malls and special occasions, and can also be used for low-level emergency lighting.
4. Technical performance:
1). Flexibility 1mm.
2). Adhesion level 1.
3). Impact strength 50kg/cm2.
4). Drying time: surface drying 2h and actual drying 24h.
5). Luminous brightness (10 minutes afterglow) 300mcd/㎡.
6). Afterglow time 200min.
5. Construction requirements:
1). Before construction, the surface treatment of the coated object should be carried out to achieve no oil, no rust marks and no dust, and the environment is required to be clean during construction, and there are exhaust air and air washing equipment and other facilities to ensure the construction quality.
2). Coating process: can be sprayed or brushed.
3). The paint must be fully stirred before use, and the construction viscosity can be adjusted to the construction viscosity with a special diluent.
4). After the substrate is treated, the primer can be brushed, and then the topcoat can be brushed after the primer is completely dry.
