One Component Acrylic Floor Paint

This product is made of thermoplastic acrylic resin, pigment, physical pigment, auxiliary agent, solvent, etc. The paint film has bright color, good weather resistance, strong adhesion, high hardness, fast drying and convenient construction.

 

 

For all kinds of factories, offices, warehouses and other places of cement floor and wall coating use. However, it is not suitable for water resistance, corrosion resistance, solvent resistance, oil resistance, and pressure requirements of the ground.

 

 

 

 

 

Drying time	Table dry 1-2 hours, fully cured for 24 hours
Construction method	Roll, brush or spray
Curing condition	The optimal operating temperature is 15-30℃ and the humidity is below 80%
Coverage rate	Each kilogram can cover an area of 8-10 square meters, depending on the surface smoothness
Abrasion resistance	Meets ASTM D4060 standard
Chemical resistance	Resistance to most oleic acid, base and salt solutions
Color stability	Keep the original color for a long time and resist ultraviolet rays

 

 

 

 

1. What is single-component acrylic floor paint?

Single-component acrylic floor paint is a pre-mixed acrylic based paint that can be used without adding curing agents or other components on site. It solidifies by moisture in the air, forming a hard protective layer.

 

2. What are the advantages of single-component acrylic floor paint?

Its advantages include quick drying, easy construction, cost effectiveness, environmental friendliness, and good wear and chemical resistance.

 

3. Single-component acrylic floor paint is suitable for what types of ground?

Suitable for many types of ground, including concrete, cement floor, wood flooring, etc., widely used in garages, warehouses, work areas, commercial Spaces and some outdoor areas.

 

4. How to prepare the floor for application of single-component acrylic floor paint?

The ground needs to be clean, dry and free of grease, dust and other contaminants. Sanding or pickling may be required to ensure good adhesion of the paint.

 

5. How long is the curing time of single component acrylic floor paint?

Curing time varies according to environmental conditions, the general surface drying time is a few hours, and full curing may take 24-48 hours.

 

6. How to construct single-component acrylic floor paint?

Construction can be done using rollers, brushes or spray guns. Before construction, stir thoroughly and follow the product instructions.

 

7. What is the maintenance and cleaning method of single-component acrylic floor paint?

Use neutral detergent and water when cleaning. Avoid using hard brushes or abrasives to avoid damaging the coated surface.

 

8. How durable is single-component acrylic floor paint?

When properly constructed and maintained, it can last for many years, but durability is affected by the conditions and frequency of use.

 

9. 1kg single-component acrylic floor paint can cover how much area?

Coverage area varies by product and construction thickness. In general, acrylic floor paint can be painted about 3-6 square meters per kilogram, which should refer to the product description.

 

10. What are the color and finish choices of single-component acrylic floor paint?

A variety of color and gloss options are available, from matte to high gloss, to meet different aesthetic needs and functional requirements. When selecting and applying single-component acrylic floor paint, it is recommended to read the product instructions carefully to ensure the best construction results.

 

Hot Tags: one component acrylic floor paint, China one component acrylic floor paint manufacturers, suppliers, factory, Zinc Rich Epoxy Primer, Water based Paint, Blue Luminous Paint, luminous powder for resin, Reflective Road Paint, Luminous Paint for Wood