It is composed of advanced acrylic resin, silicone resin, pigment, additives and solvent. Excellent weather resistance; Paint film decoration performance is good (full bright, high hardness); Good chemical resistance; Excellent light preservation and color retention; High adhesion, good mechanical properties.
Suitable for all kinds of traffic vehicles, construction machinery, advanced equipment and other surface requirements of high-grade decoration objects, especially suitable for outdoor use.
ISO Quality Management System Certification
Physical Parameter
|
Dry film thickness |
35-40 microns |
|
Wet film thickness |
100-110microns |
|
Theoretical dosage |
7-8㎡/kg (dry film thickness 35 microns) |
|
Gloss (60°) |
Surface dry ≤2 hours; Work ≤24 hours |
|
fineness |
≤20microns |
|
Pencil hardness |
≥HB |
|
adhesion |
≤Level 1 |
|
Water resistance (240h) |
Does not blister, does not fall off, does not wrinkle |
|
Gasoline resistance (24h) |
Does not blister, does not fall off, does not wrinkle |
|
Alkali resistance (24h) |
Does not blister, does not fall off, does not wrinkle |
|
Weather resistance (artificial accelerated aging 600h) |
Loss of light ≤1, powder ≤1 |
Instructions For Use
1, The surface of the workpiece requires the removal of rust and oil dust on the surface of the coated material, and the surface should be clean to ensure the excellent performance of weather resistance, water resistance, gloss and adhesion of the paint film. The front paint must be completely dry
2, The long-cured two-component paint film needs to be polished with fine sandpaper and then painted after the finish.
3, Coating method: brush coating, spraying.
Acrylic thinner for air spraying
Dilute release 35-50%
Nozzle diameter 2.0-3.0mm
Spray pressure 0.3-0.6Mpa (about 3-6Kg/cm²)
4, In order to ensure the quality, please use the matching alkyd paint special thinner.
Safety protection
The construction site should have good ventilation facilities, painters should wear glasses, gloves, masks, etc., to avoid skin contact and inhalation of paint mist. Fireworks are strictly prohibited at the construction site.
Notes appended to a book
The relevant data in this note are obtained in the laboratory, and the actual data may be slightly different due to environmental changes in actual use. The above data is subject to change without prior notice.
FAQ
1. What is single-component acrylic enamel?
Single-component acrylic enamel is a special coating with magnetic properties. As a single-component paint, it does not need to be mixed with other substances to be used, simplifying the construction process. The following is a detailed introduction to single-component acrylic enamel:
Single-component acrylic enamel is mainly composed of acrylic resin and magnetic particles. These magnetic particles give the paint its magnetism, allowing it to adsorb magnetic objects. This paint is widely used in creative decoration, education, commercial display and home organization, providing users with an innovative interactive experience.
The manufacturing process usually involves dispersing magnetic particles evenly in the acrylic resin, ensuring that the paint has consistent magnetic properties. Due to its single-component nature, the construction process is simple and straightforward, without complex mixing or adding steps.
The advantages of single-component acrylic coatings are not only their magnetic properties, but also their good adhesion and durability to a variety of surfaces. It can be applied to walls, wood, metal and other common surfaces, providing users with a wide range of application possibilities.
In addition, single-component acrylic enamel also focuses on environmental friendliness and safety. Most products are formulated with low volatile organic compounds (VOCs), reducing potential impacts on the environment and human body, making them a sustainable and healthy option.
Overall, single-component acrylic enamel is an innovative coating product that combines magnetic properties, a wide range of applications and environmental friendliness. Whether it is creative decoration, practical application or educational tool, it provides users with a new, practical and fun solution.
2. What are the main components of single-component acrylic enamel?
The core components of single-component acrylic enamel include acrylic resin and magnetic particles.
Acrylic resin:
Acrylic resin is the main substrate of this enamel. It gives the paint its strong, durable properties. Acrylic resin has good adhesion, so that the paint can firmly adhere to a variety of surfaces. In addition, it provides the hardness and scratch resistance of the coating, ensuring the long-term protection and aesthetics of the coating.
Magnetic particles:
Magnetic particles are the key components that give enamel its unique function. These tiny particles are dispersed evenly in the acrylic resin, providing the paint with magnetic properties. Magnetic particles are usually made of iron, nickel or other magnetic materials and have strong magnetic properties that enable the coating to adsorb magnetic objects.
In addition to these main ingredients, single-component acrylic enamel may also contain auxiliary ingredients such as diluents, preservatives, and pigments to adjust the fluidity of the paint, prevent bacterial growth, and provide the desired color.
3. What are the advantages of single-component acrylic enamel?
First of all, the unique magnetic function is the core advantage of single-component acrylic enamel. This coating has strong magnetic properties and can easily adsorb magnetic objects such as tiles, magnetic decorations and other magnetic accessories. This provides users with an innovative interactive experience and flexible decoration options.
Second, single-component acrylic enamel has excellent adhesion and durability. Thanks to the properties of acrylic resin, this coating can be uniformly and firmly attached to a variety of surfaces, such as walls, wood, metal, etc. Its durability ensures that the coating retains its magnetic properties and appearance for a long time, reducing the need for maintenance and replacement.
In addition, single-component acrylic enamel has a simple construction process. As a single-component coating, it requires no complex mixing or special construction techniques. Users can easily carry out construction and obtain satisfactory painting effect.
Environmental friendliness is also an important advantage of single-component acrylic coatings. Many products are formulated with low volatile organic compounds (VOCs), reducing potential environmental impact while providing a safer and healthier construction and use environment.
4. Where is single-component acrylic enamel applicable?
Walls: Whether indoor or outdoor walls, such as drywall, stone, concrete or brick walls, can be painted with single-component acrylic enamel.
Wood: including furniture, wood decoration, cabinets and other wood products, are the ideal choice for painting enamel.
Metal: For doors, Windows, metal walls or other metal surfaces, single-component acrylic enamel ensures that the coating is stable and not easy to peel off.
Glass: In some cases, such as commercial displays or creative designs, the glass surface can also be painted with a special finish.
Plastics and synthetic materials: Certain types of plastics or synthetic materials, such as certain home decorations or commercial displays, may require special primers or treatments before they can be applied with enamel.
5. How long is the drying time of single component acrylic enamel?
The drying time of a single component acrylic enamel depends on a number of factors, including the construction environment, coating thickness, humidity and temperature. Typically, drying times can range from a few hours to a day, but for best results, it is recommended to follow the following:
Refer to manufacturer's instructions: Different brands and types of single-component acrylic enamel may have different drying times. Always refer to the product label or technical data sheet (TDS) provided by the manufacturer for exact drying times and recommendations.
Construction conditions: The drying time is affected by the construction environment. In humid or low temperature environments, the drying time may be extended. Ensuring that the temperature and humidity of the construction environment meet the product requirements can help speed up the drying process.
Coating thickness: The thicker the coating thickness, the longer the drying time may be. Apply according to manufacturer's recommendations to ensure uniform coating and avoid overcoating.
6. How is the weather resistance of single-component acrylic enamel?
As a special coating, single-component acrylic enamel has its unique properties. Among them, weather resistance is a key indicator to measure the stability and durability of the paint in the external environment. The following is an article on the weather resistance of single-component acrylic enamel:
The weatherability of single-component acrylic enamel is mainly affected by its composition, manufacturing process and application conditions. In many application scenarios, it shows excellent weather resistance and meets the challenges of outdoor environments.
First, the acrylic resin matrix of a single-component acrylic enamel provides good physical and chemical stability. This resin has excellent UV resistance, chemical resistance and pollution resistance, allowing the paint to maintain its original appearance and performance in different climatic conditions.
Secondly, the uniform dispersion and stability of the magnetic particles ensure the consistency and durability of the paint. These tiny particles are fixed in the paint matrix and are not susceptible to external environmental factors such as humidity, temperature and chemicals.
However, as with all coating products, the weatherability of single-component acrylic coatings also requires proper application and maintenance. Here are some tips and considerations:
Correct construction: Make sure to work on a dry, clean surface and apply as recommended by the manufacturer. Uniform coating and appropriate coating thickness help to improve the weatherability of the coating.
Avoid extreme conditions: Although single-component acrylic coatings have good weather resistance, prolonged extreme conditions such as high temperatures, ultraviolet strong sunlight, or high humidity can affect their performance. In these environments, regular maintenance and inspections are necessary.
Regular inspection and maintenance: Check the state of the coating regularly and clean, repair or repaint it as needed. Timely detection and treatment of any problems can extend the life of the paint and maintain its appearance.
In summary, single-component acrylic paints show excellent weather resistance and are suitable for a variety of outdoor and indoor applications. With proper construction, proper maintenance and avoidance of extreme conditions, it can provide users with long-lasting, reliable coating solutions. For projects that need to be used in outdoor environments, selecting a high-quality single-component acrylic enamel and following best practices can ensure the best performance and long-term value.
Hot Tags: one component acrylic enamel, China one component acrylic enamel manufacturers, suppliers, factory, Acrylic Polyurethane Finish, Super Reflective Paint, Anticorrosive Paint, Phosphate Epoxy Primer, white reflective paint for metal, black reflective paint for house numbers
