Blend Paint

 

This product is made of dry resin, pigment, physical pigment, drying agent and solvent processing.

 

Good paint film adhesion; bright color; convenient construction. Suitable for all kinds of wood, metal components and other surface coating and corrosion prevention.

 

Conform with the sample plate and its color difference range.

 

State in the container: No lumps during mixing and uniform state

Paint film appearance: normal

Dry film thickness: 35-40µm/lane

Theoretical dosage: 3-5m²/kg (dry film thickness 35µm)

Drying time (25±1℃): surface drying ≤6 hours; solid drying ≤36 hours

Gloss (60°): ≥20%

Fineness: ≤35μm

Outflow time (ISO 6 cup/s): ≥40

Bending resistance: ≤3mm

Water resistance (8h): No abnormality

Skin resistance (48h): no skinning

 

Once a day, it is recommended to paint 2 times.

 

Adjust rust primer.

 

Above 3 C above the dew point.

 

Store closed in a cool and dry place for 12 months, if the expiration date exceeds It can still be used after passing the inspection.

 

1, before use must be mixed, such as coarse grain, skin should be filtered.

2. Use a special diluent to adjust the construction viscosity.

3, roller coating, brushing coating, air spraying can be.

4, the substrate should be cleaned up, no floating ash, oil pollution, wax, etc., if the primer Or the substrate is too smooth must be polished with fine sandpaper.

5, if the brush twice, can be in the first time after the table dry before or completely dry After using 120 mesh sandpaper grinding evenly before brushing.

6, the remaining paint is covered with a small amount of diluent, and sealed in time to prevent knots skin.

7. In order to ensure the quality, please use the matching special thinner for mixing paint X. Safety protection

 

The construction site should have good ventilation facilities, painters should wear good glasses, gloves, Masks, etc., to avoid skin contact and inhalation of paint mist. Fireworks are strictly prohibited at the construction site.

 

The data presented in this description are obtained in the laboratory due to environmental changes The measured data may be slightly different from this one. If the above data changes, the company is the latest The instructions shall prevail without further notice.

 

 

1. What is mixed paint?

Mixing paint is a type of paint used to repair and beautify the surface of wooden objects. It is usually used to match and repair the existing color and texture. Its main purpose is to harmonize the repaired area with the surrounding surfaces for a seamless transition in appearance. Mixed paint is usually used in furniture, musical instruments, wooden floors, decoration, etc. to repair scratches, abrasions, cracks or other surface defects to maintain the original appearance of the object or improve its beauty. This type of paint is typically used by professional technicians or craftsmen, as it requires special skills to match the color and texture for the best possible repair.

2. What are the main uses of mixed paint?

1. Furniture repair: Mixed paint is often used to repair scratches, wear, cracks, or other damage on the surface of wooden furniture to restore the original appearance of the furniture.

2. Musical instrument maintenance: Mixed paint is widely used in musical instrument maintenance, especially in the surface repair of pianos, violins, guitars and other musical instruments to maintain the beauty and sound quality of the instruments.

3. Decoration and carpentry: In decoration projects, mixed paint can be used to repair or supplement wooden structures, floors, doors and windows, etc., to make them look novel, unified, and coordinated with the surrounding decoration.

4. Waterproofing and sealing: Some types of mixed paint have waterproofing and sealing functions and can be used to protect wooden surfaces and prevent moisture penetration and damage.

5. Arts and Crafts: Blended paints are also used in arts and crafts to enhance their appearance, protect surfaces, and realize the artist or maker's design vision.

In summary, tempered paint is mainly used for the repair and beautification of wooden objects to ensure that they retain their original appearance and extend their service life. Different application areas require the use of different types of paint mixes to meet specific needs.

 

3. What is the difference between mixed paint and ordinary paint?

1. Color matching: Mixed paints are specifically designed to match and replicate pre-existing colors and textures so that the repair will harmonize with the original surface. Ordinary paint usually does not have this matching performance.

2. Repair purposes: Mixed paint is mainly used to repair scratches, abrasions, cracks or other damage on the surface of wooden objects to maintain its original appearance. Regular paint is often used to cover surfaces or create new colors and effects.

3. Material formula: Mixed paints usually use special material formulas to ensure that they are similar to the original materials, including color, texture and gloss. Regular paint, on the other hand, may come in a variety of chemical compositions and be used on different types of surfaces and uses.

4. Restoration Skills: Working with blended paints requires special skills and experience to ensure successful color and texture matching, as well as a seamless restoration. Regular paint may be easier to apply and usually does not require a high degree of specialist skill.

5. Usage environment: Mixed paint is usually used in required restoration projects, such as furniture restoration, musical instrument restoration and decoration. Regular paint can be used in a variety of different applications, including walls, home renovations, and art creations.

Generally speaking, mixed paint is a type of paint specifically used to restore the appearance of wooden objects. Its main characteristics are color matching and repair purposes to ensure that the repaired part is in harmony with the original surface. In contrast, regular paint is more versatile and can be used for a variety of different painting and decorating tasks.

 

4. How to match the color of mixed paint?

Matching the paint color is a critical step to ensure that the repaired area harmonizes with the original surface. Here are some common methods used to blend paint colors:

1. Color spectrum charts: Professional restorers often use color spectrum charts, which list samples of various colors, including the colors of different wood species. They can compare the color of the sample and the restoration to find the closest match.

2. Color-mixing techniques: Restorers can use color-mixing techniques to mix paint mixes of different colors together for a more accurate match. It may take some experimentation and experience to find the perfect color.

3. Color Observation: The restorer will carefully observe the color and texture of the original surface to replicate these features as accurately as possible. This includes paying attention to the shade, saturation, and hue of the color.

4. Light considerations: Lighting conditions can affect the appearance of color, so restorers often check color matches under different light conditions to ensure the color looks consistent in various situations.

5. Comparison samples: Sometimes, the restorer may take a small sample of the original surface to color match in the lab. This method provides more accurate matching because it uses actual samples.

6. Artistic sense: Experienced restorers often rely on their artistic sense and intuition to ensure a successful color match. Their expertise and experience allow them to judge colors more accurately.

 

Color matching is an important part of mixed paint restoration and often requires careful attention and expertise to achieve the best results. The experience and expertise of the restorer is critical to a successful color match to ensure that the repaired surface is consistent with the original surface with no visible differences.

 

5. What tools are needed to use mixed paint?

Restoring with mixed paint requires some specific tools to ensure the repair job goes smoothly and effectively. Here are some commonly needed tools:

1. Mixed paint: Of course, you first need the appropriate type and color of mixed paint.

2. Brushes: Brushes of various sizes used to apply blended paint for detailed painting work.

3. Wiping cloth: Cloth used to wipe, polish and clean the surface to ensure the gloss and smoothness of the paint.

4. Sandpaper: Used to grind surfaces and prepare them for mixed paint. Sandpapers of different grits can be used for varying degrees of sanding work.

5. Primer: Some repair jobs require a primer before applying the mixer to ensure adhesion and consistency of the paint.

6. Cleaning solvent: used to clean and prepare surfaces to remove old paint, stains and other impurities.

7. Color mixing tools: Tools used to mix and match colors, such as a palette, palette knife, or mixing cup.

8. Protective equipment: Appropriate protective equipment, such as gloves and respiratory masks, is required when working to protect the skin and respiratory system.

9. Lighting equipment: Proper lighting can help the restorer observe color and texture more accurately for color matching and detailed work.

10. Auxiliary tools: Depending on the specific repair work, other auxiliary tools may be needed, such as caulking agent, carpentry tools, scrapers, drying equipment, etc.

Different restoration projects may require different types and sizes of tools, so restorers often select the appropriate tools and materials based on the specific task. Keeping tools and equipment clean and well-maintained is also a key factor in ensuring a successful restoration

6. What are the steps for using mixed paint?

Restoring with mixed paint typically involves the following general steps, but the specific steps may vary depending on the type and condition of the object being repaired:

1. Preparation:

Clean the surface: First, make sure the surface of the repair area is clean, removing dust, stains, and old paint.

Abrade the surface: If necessary, lightly abrade the surface using appropriate grit sandpaper so that the mixer will adhere better.

2. Color matching:

Choose the right paint mixer color: Match the color of the area that needs repair, using a color spectrum chart or tinting tips to find the closest color.

Test the color: Test the color in an inconspicuous place to ensure a satisfactory match.

3. Primer (if needed):

If necessary, apply a primer to improve adhesion of the mixer and to ensure a color match.

4. Apply mixing paint:

Using an appropriate brush, carefully apply the mixer, making sure to cover the area that needs repair and match the surrounding color and texture.

In cases where multiple layers of repair are required, wait for each layer to dry before applying the next.

5. Drying:

Wait for the mixed paint to dry completely. Drying time depends on the type of paint and environmental conditions, but usually takes several hours to several days.

6. Grind and Gloss:

If necessary, lightly sand the repaired area with finer-grain sandpaper to make it smoother with the surrounding surface.

Use a wipe to buff the repaired area to restore shine.

7. Check and correct:

Inspect the repair area to make sure the color and texture match the surrounding surface.

If necessary, further adjustments and corrections are made to meet the desired restoration effect.

8. Cleaning and maintenance:

Clean tools to ensure they stay in good condition.

Follow maintenance recommendations to ensure your repair is long-lasting.

Please note that these steps are only a general guide and the specific repair process may vary depending on the type and condition of the object being repaired. Complex restoration work, especially on items with extensive damage, is best done by professional restorers who have the necessary skills and experience to ensure the best possible repair results

 

7. How long does it take for mixed paint to dry?

The drying time of mixed paint depends on several factors, including the type of paint, thickness, ambient temperature and humidity. Generally, the drying time of mixed paint can be estimated within the following ranges:

1. Fast-drying paint: Certain types of blended paint are designed to dry quickly, usually within a few hours. This is useful for projects where repair work needs to be completed quickly.

2. Standard drying time: Usually, the average mixed paint takes a day or more to dry completely. This means the repair will need to wait at least a day before proceeding to the next step.

3. Long drying time: In environments with higher humidity or in cold weather, drying time may be longer and may take several days.

To ensure optimal repair results, it is recommended to follow the manufacturer's instructions for your specific paint mix product for drying times. Manufacturers often provide information on ideal temperature and humidity conditions and recommended drying times. Additionally, following some general advice below can help speed up the drying process:

Work in a warm, ventilated environment to promote quick drying.

If possible, keep the relative humidity within a suitable range, as too high a humidity will prolong drying time.

When applying multiple coats of mixed paint, make sure each layer is fully dry before applying the next.

Using accelerators or drying equipment can speed up the drying process, but caution is required to avoid problems.

In summary, drying times for paint mixes vary based on a variety of factors, but following the manufacturer's recommendations and providing the proper environmental conditions will usually result in the best drying results.

8. How durable is the mixed paint repair?

The durability of a mixed paint repair depends on several factors, including what is being repaired, materials used, repair techniques, environmental conditions, and routine maintenance. Generally speaking, tempered paint repairs can last for many years, but they require the right care and maintenance to ensure their longevity.

Here are some of the key factors that influence the durability of paint repairs:

1. Materials and Techniques: Using high-quality paint mixes and professional restoration techniques will often produce longer-lasting repairs. Experienced restorers can ensure color matching and texture harmony for improved durability.

2. Environmental conditions: Environmental conditions have an impact on durability. High temperatures, high humidity, direct sunlight, and pollutants may accelerate the fading and wear of the mixer.

3. Purpose: The purpose of the object is also a factor. Items that are frequently touched or used, such as furniture and musical instruments, may be more susceptible to wear and tear.

4. Maintenance and upkeep: Regular maintenance and upkeep is essential to maintain the appearance and durability of your blended paint repair. Keeping it clean, avoiding scrapes and scratches, and avoiding the use of harmful chemicals are part of maintenance.

5. Defects and Damage: If the restored object suffers new damage or blemishes, further restoration work may be required to maintain its appearance.

Overall, tempered paint repairs usually provide considerable durability for a long time, but they are not permanent. Depending on the characteristics and use of the object, regular maintenance and necessary restoration work may be required to maintain its appearance. For valuable furniture, antiques or musical instruments, experienced professional restorers can provide the best possible restoration and maintenance advice to ensure their long-term value and beauty.

 

9. Can I use mixed paint to repair a piano myself?

Answer: Restoring a piano using mixed paint usually requires certain professional skills and experience, because the piano is a delicate instrument, and its appearance restoration requires a high degree of precision and aesthetic judgment. While some minor surface scratches or scuffs may be repairable by the average person themselves, more complex repairs often require the involvement of a professional restorer.

Here are some considerations:

1. Artistic Skills: Mixed paint repair requires matching color and texture to ensure that the repaired area harmonizes with the original surface. This requires artistic skill and experience.

2. Professional tools: Using mixed paint requires appropriate tools and materials, such as brushes, wipes, sandpaper, etc. Professional restorers usually have these tools and know how to use them.

3. Piano structure: The repair of the piano surface usually involves the keys, wooden shell, soundboard and other parts, which require special processing and skills.

4. Risk of errors: Improper repairs can cause more serious damage, reducing the value and appearance of the piano.

If you are not confident enough or do not have the necessary expertise to restore your piano using paint mix yourself, it is recommended that you seek out an experienced professional restorer to complete the work. They will be able to provide high-quality restoration to ensure that the piano's appearance and value are maintained.

 

10. How much does a mixed paint repair cost?

The cost of tempered paint restoration varies depending on the scope and complexity of the restoration project. Restoration work can cover a variety of projects from small surface scratches to complex wooden furniture restoration. Here are some factors that affect the cost of paint repair:

1. Scope of repair: The scope of the repair is a major factor. Small-area repairs usually cost less, while large-area repairs require more work and materials, and the cost will increase accordingly.

2. Complexity: The complexity of a restoration project affects cost. More complex repairs that require color matching, texture duplication, gloss matching, etc. may require more time and skill and therefore cost more.

3. Materials and Tools: The mixer, primer and other materials used, as well as the choice of tools, will affect the cost. High-quality materials and specialized tools often add to the cost of restoration.

4. Region: The cost of repair services may vary in different regions. Typically, repair costs may be higher in larger cities.

5. Experience and Skills: Experienced professional restorers will usually command higher fees because their skills and experience ensure a high-quality restoration.

6. Restoration objects: Different types of restoration objects, such as furniture, musical instruments, artwork, etc., may have different costs. Certain objects may require more special handling and techniques.

 

Generally speaking, small surface repairs can cost anywhere from a few dozen dollars to a few hundred dollars, while more extensive or complex restoration projects can cost hundreds of dollars or more. The best way is to consult an experienced professional restorer who can provide an accurate quote based on the specific project and recommend the most suitable repair method. The cost of restoration may also include maintenance and subsequent repairs required to ensure the long-term durability of the restoration

Hot Tags: blend paint, China blend paint manufacturers, suppliers, factory, Water based Paint, Asphalt Modifier, Phosphate Epoxy Primer, Acrylic Polyurethane Finish, Epoxy High Build Primer, Acrylic Polyurethane Enamel